PPArkisto

USB

Ongelmat

Sivu 1 / 1

Viestit

Sivu 1 / 1
Rekisteröitynyt:
10.12.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 12.44
Mistä saan sony ericsson k500 ajurin koneelleni!!!
omglolcs
Rekisteröitynyt:
14.05.2001
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 12.56
They'll tear you apart, bone by bone and build with you a human throne...This key unlocks gates of hell. Steady traveler, use it well   koti.mbnet.fi/pyyhis - www.v2.fi/pelit/
Rekisteröitynyt:
04.12.2001
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 12.56
In a world gone mad only a lunatic is truly insane.
Rekisteröitynyt:
10.12.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 13.23
joo... ton löysin netistä...

mutta mistä saan avattua sen jutun että pääsen lisäämään juttuja puhelimeen???
omglolcs
Rekisteröitynyt:
10.12.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 13.56
APUWA!

nyt tarvisin äkiä neuvoa!!!!!!!!!!

miten lisään sitä musaa sinne puhelimeen kun on usb cd asennettu ja ajuri on koneella kanssa... ja myös usb kaapeli on tietokoneessa ja puhelimessa kiinni
omglolcs
Rekisteröitynyt:
05.08.2003
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 13.56
Muokattu: 26.12.2004 klo 13.57
Lue ohjeet.
Lainaus:Asennusohje
1. Download the zip file to your computer. Remember where you place it.
2. Unzip the file to a temporary folder.
3. Connect the DCU-11 cable. This will initiate the Windows Plug-and-Play wizard to be used during the installation.
4. Follow the instructions in the wizard, but browse to the temporary folder created under step 2 above to point to the driver to install. For Windows ME it is essential that you select driver from the 98_ME folder.
5. Connect your mobile phone to the DCU-11 cable.

Käyttöohjeet
The connection to the mobile phone is now ready to use. If you want to use your mobile phone for mobile networking you also have to install a serial modem. During that installation you will need the COM port to which the DCU-11 is linked. To determine the COM port do as follows:

1. Open the Control Panel.
2. Open System.
3. Select the Hardware/Device Manager tab.
4. List the ports.
5. Identify the COM port to which the DCU-11 is linked.
6. Use that COM port when installing the serial modem.

To be able to get a connection between the phone and any of the PC Suite applications with the DCU-11 cable, you have to configure the Mobile Phone Monitor to listen to the DCU-11 COM port. Proceed as follows:

1. Go to the Control Panel->System->Hardware->Device Manager.
2. Open the node Ports (COM & LPT). Find the DCU-11. Remember the COM port number to which it is connected.
3. In the Control Panel, start the Phone Monitor Options. Select the COM ports tab.
4. In the COM ports list, make sure the DCU-11 COM port is Enabled.
Rekisteröitynyt:
10.12.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 14.15
no voi *****!


miten lisään niitä puhelimeen?? tarviiko siihen jonkun ohjelman?
ja jos tarvii niin jos vaikka klikkaa biisii hiiren oikealla niin lähetä ja sielä ei ole mitään semmosta puhelin tai jotain muuta
omglolcs
Rekisteröitynyt:
10.12.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 14.59
auttakaa *******!
omglolcs

BloodLust

Moderaattori

Rekisteröitynyt:
01.01.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 15.32
ei k500i ole mp3 soitinta
Rekisteröitynyt:
10.12.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 16.22
Lainaus:26.12.2004 Unreal04 kirjoitti:
ei k500i ole mp3 soitinta

no onhan
omglolcs
Rekisteröitynyt:
20.09.2002
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 16.45
Intel Pentium 2933 MHz | 1536 MB DDR | Asus Radeon AX800 Pro | 3 x Maxtor HD DiamondMax 250GB | KOTISIVUT|
Rekisteröitynyt:
10.12.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 17.17
mulla on joku ohjelma mutta se ei löydä mun puhelinmallia
omglolcs

BloodLust

Moderaattori

Rekisteröitynyt:
01.01.2004
Kirjoitettu: sunnuntai, 26. joulukuuta 2004 klo 22.57
Lainaus:26.12.2004 pyykkiteline kirjoitti:
mulla on joku ohjelma mutta se ei löydä mun puhelinmallia


no ei ole ei ainakaan specisen mulakaa
Sivu 1 / 1