elikkäs... koska aloitin seeässän pelaamisen tuossa viikko sitten, en osaa tehdä omia logoja. kerran siinä onnistuin (vahingossa )
joten voisiko joku neuvoa miten sen saisi joka kerta onnistumaan. minulla on hl tag converter mutta en vain oikein onnistu siinä...

Lue se readme mikä tuli sen tagconvertedin mukana

ei tullu riidmiitä ku sain vaan executablen kaverilta

Suora kopio readme:stä:
====================================
* Detailed Instructions *
====================================

1. Press the "Open" button and choose the image file you want to use
as tag. (The image should appear in the main window once loaded)

2. The "Save" button should be grayed at this point, because the image
is not in the proper format & size to be used as a tag

Press the "Adjust" button to bring up the dialog used to convert
the image to the proper format.

3. Select the tag size you want in the adjust dialog. By default this
is set to the maximal allowed size that wont deform the image, so
you normally wouldn't want to touch this, however if you wish to
set your custom size, you must obey the following rules:
- The width and the height of the image must both be a positive number
divisible by 16. (e.g. 16, 32, 48, 64, 80, ...)
- The surface of the image (the width multiplied by the height)
must be strictly less than 12288.

4. If you want to make one or more colors of your image transparent, you
can use the the tool provided for this purpose by clicking the
"This tool will allow you to make a specific color transparent"-button,
and then clicking on a color in the image. All areas of the image with
the color you select will become blue (transparent)!!

Note: If you change the size of the tag after using this tool, all color-
changes will be discarded!

5. When you're done, click the "Apply changes and convert to 256 colors".
(Or click "Cancel" to revert to the image you had before clicking "Adjust"

6. Now you should be able to press the "Save" button. You will then be
prompted for the file to save the tag to.

The tag should be saved in the directory of the half-life mod you want
to use it in, and should be named "pldecal.wad", for example if you
installed Half-Life in "C:SIERRAHalf-Life" and you wanted to use the
tag in Counter-Strike, you would save it to
"C:SIERRAHalf-Lifecstrikepldecal.wad".

If you want to use the tag with Hl-Tweaker (not yet released at the time
of this writing, check http://devix.cjb.net for updates) you should save
it in the tags folder of wherever you installed Hl-Tweaker.
The file can be named what you want, but it must have the ".wad" extention.
(e.g. "C:Program FilesHlTweakertagsmytag.wad"

7. That should do it

Oli kiva olla avuksi...

piirrä paintilla yksinkertaista

http://www.pro-hl.com/css_sprays.shtml

Aika yksinkertainen ohje.

http://www.mavisxp.com/archives/000021.html

Tässä vielä toinen jossa transparent spray.